r/DIYUK • u/JustGhostin • 1d ago

Cheers Dad!

Post image

Brought my first house earlier this year and needless to say my dad is exited to show me the ropes. He trained as carpenter and also worked as a window fitter in his 20’s before changing careers.

Blessed to have his knowledge and help.

425 Upvotes

98% Upvoted

66 comments sorted by

View all comments

Show parent comments

18

u/JustGhostin 1d ago

What kind of blades should I pick up?

48

u/LazarusOwenhart 1d ago

Personally I use Freud or Saxton. The more teeth, the cleaner, but slower, the cut. If you're hogging down plywood get fewer teeth, if you're doing laminate you want a nice fine tooth. Having a selection of blades is never a bad thing. Don't be afraid to go to your local tool dealer (A real one not b&q) and have a conversation. Cutting with a circ saw is an art, go to hard and you'll burn the piece, too slow and you make crap cuts. A decent blade will help your confidence because it won't trap you in the cycle that a lot of beginners get into where they assume a bad cut is 'their' fault when actually it's just a bad blade.

16

u/JustGhostin 1d ago

Cool, that’s really good advice. thank you. Also can I ask about the standard chuck to SDS adapter, is that to use regular drill bits in the SDS?

17

u/LazarusOwenhart 1d ago

So that drill has an SDS chuck. It's a chuck that lets you click drill bits in and out. Very good in dusty, grimy environments, and most masonry bits are SDS. For wood however, the drill bit shanks will be cylindrical and therefore incompatible with SDS. Pop on Amazon and search "SDS chuck adaptor" and you'll find normal 3 jaw drill chucks that can snap into your SDS. Makes that hammer drill even more useful than it already is.

10

u/Open-Mathematician93 1d ago

This guy tools.

1

u/JustGhostin 1d ago

Got it, thanks

15

u/LazarusOwenhart 1d ago

No problem, happy DIY-ing. In 5 years when you're neck deep in fitting your first kitchen and trying to explain to your significant other why £1000 for a Festool track saw is perfectly reasonable don't say we didn't warn you. XD

2

u/5everAl1 1d ago

Personally I wouldn't bother with the chuck. SDS will be too powerful and heavy for a lot of jobs.

Get a drill driver like this.

https://www.screwfix.com/p/erbauer-edd18-li-2-18v-li-ion-ext-brushless-cordless-drill-driver-bare/925FV?gclsrc=aw.ds&gad_source=1&gclid=Cj0KCQiAvbm7BhC5ARIsAFjwNHujgc8218yG8M-qSwGqotltxjH5QpuV-vfFcXWlOL10O83G8Yl3aQwaAsJ6EALw_wcB&gclsrc=aw.ds

2

u/JustGhostin 1d ago

I’ve already got a combi drill and impact

1

u/AreEUHappyNow 1d ago

Just use those for wood then, the SDS is a bit overkill for that kind of work.

1

u/paulyp79 16h ago

Agreed, I have had one of these in my box for a few years now and I only use it when I have a bigger sized holesaw to use