r/DMR 1d ago

How to unlisten?

4 Upvotes

I figured out I have to key the mic to hear a talk group. But now I want to listen to a different group. When I try to change channel on my radio it changes back to the first talk group as soon as someone speaks. How do I turn off the first group so I can change channels? (Baofeng 1701 opengd77 and simplex hotspot wpsd)


r/DMR 3d ago

Corupt TYT Cps

Post image
5 Upvotes

I bought a tyt md UV 390 plus and downloded the Cps but non of the Text ist redebel. If tried uninstalling and installing it multiple Times but IT dosend Work does aneone know a fix?


r/DMR 4d ago

Help with opengd77 banded 1701 and hotspot

3 Upvotes

I’ve watched several videos and was able to flash my baofeng 1701 to opengd77 and configured a mmdvm with wpsd. The hotspot dashboard shows all green status for dmr on brandmiester network.

I’ve configured the opengd77 cps with a digital contact entry for parrot, a TG list named hotspot with parrot as member, a zone named digital with the hotspot list as member. I have a channel named hotspot configured

I’ve written this to the radio. When I turn on the radio, I can change the channel to 1 and it shows parrot on hotspot in dmr mode. However when I transmit nothing comes back. The wpsd dashboard does not show any activity. What am I missing?


r/DMR 4d ago

BTECH DMR 6x2 Pro help

2 Upvotes

I hate doing this, but I’ve exhausted all research and I need help. I just got a new BTECH DMR6x2 Pro and I am not have any luck receiving or sending digital calls.

I live in CO and have programmed my radio for the Rocky Mountain ham group of digital repeaters. They offer code plugs which I have used to program the radio. Here is the link to their site

https://www.rmham.org/dmr-site-information/

I have checked and rechecked all the frequencies, time slots, color codes, zones, talk groups, etc and I can’t see what is wrong.

I am also not clear on the receiving side either. I see a green light showing activity and if I change the channel setting to analog I hear the digital signal noise. When I put it back to digital I get nothing. I have even tried putting the radio in VFO mode on that repeater frequency and tried the digital monitoring feature and nothing. I am at a complete loss.

All my channels and Timeslots are assigned to a talk group. I also have the radio in digital monitor which should let me hear conversations from Any talk group or time slots.

The other odd thing is that a green light is supposed to be analog but when I turn the repeater channel to analog I get a digital transmission sound. The light is supposed to be teal when digital is detected.

I have made 1 successful contact on one of the talk groups and local repeater which the light was teal during reception.

Any help would be appreciated.


r/DMR 5d ago

MD-390 GPS No USB Devices

1 Upvotes

OK, got my new 390 today and I want to eventually install OpenGD77.

Connected to the Windows 10 computer and it was seen as a STM Device in DFU Mode ONLY. I ran the update for the USB drivers from the CD that came with the 390. There were no changes other than STM Device in DFU Mode is now gone and there were Side by Side errors in the event log. I ran the Visual Studio C++ update and got rid of the Side by Side error but still not USB or any connections...

Suggestions?


r/DMR 5d ago

tyt md-uv380-firmaware d017.005 cps 01.07

1 Upvotes

come progammare in dtmf???


r/DMR 7d ago

Looking for radio

5 Upvotes

Currently have a baofeng dm-1701 looking to upgrade a bit something that’s just the next step up was looking at the radioddity gd-88 but I heard bad stuff about it was wondering if they fixed everything through updates if not what’s some more suggestions really looking for dmr vhf/uhf coverage don’t have a lot of money so keep that in mind also just open to suggestions


r/DMR 7d ago

Tidradio GP-660 programming

1 Upvotes

Has anyone here successfully programmed a GP-660 with software?

I was told by Tidradio they were going check with the factory because the provided software did not work.


r/DMR 9d ago

TYT MD-UV390 GPS Anyone Using This for OpenGD77?

1 Upvotes

I see most comments are about the TYT MD-UV390 or 380, plus, 10watt etc but I don't see anything about the TYT MD-UV390 GPS.

Comments, Suggestions?


r/DMR 10d ago

This may sound like a crazy idea but...

7 Upvotes

I got into DMR a few months ago and I have been using a TYT handheld and a MMDVM hotpsot. I've tried both Pi-Star and WPSD, and had nothing but consistency issues since day one. It is any number of things, but mainly just keeping an MMDVM unit operating correctly.

I finally bought bought a real nice mobile - a Yaesu FTM-500DR. I know that this is C4FM, but my thoughts further still apply.

Why don't these radio manufacturers just build the necessary wifi components into the radio, thus eliminating the need for a separate unit? I can't be the only one who's thought of this. I could understand it being a little more rare in HT models, but it should be included with mobile units for sure. The components don't cost that much... I mean seriously, we have $50 inkjet printers that are able to connect to wifi.


r/DMR 10d ago

Anytone 878 APRS not receiving correctly

1 Upvotes

Ok here is a strange one ...for me....

I have several devices that send APRS. All of them work well, but for some reason my Anytone 878 ++ is only displaying "APRS DIGITAL" when I recieve a message. All my other devices look ok. Any idea what may be causing this?

73 Brian


r/DMR 11d ago

Hytera 402i will not program "Failed to connect"

1 Upvotes

As the title says, I have 1 (of 47) Hytera 402i units that when connected to the programming cable, I get an error message when attempting to write the programming "Failed to connect" Since it works on all other radios, I believe it is something wrong with this radio. Any suggestions on how to resolve this?


r/DMR 14d ago

TYT MD-380 USB Driver

1 Upvotes

Does the 380 come with a USB driver that has to be installed or does it use a windows driver?

Thanks


r/DMR 15d ago

Retevis RT3S Firmware Update Question

1 Upvotes

I had some problems with my first RT3S and could not get the USB driver to work. I belive that the USB driver started working was AFTER I updated the Firmware. I want to backup everything on the radio (was hoping to BU the original FW also).

MY question:

Will Updating the FW change the "Calibration File"? I don't see where it would but I just want some advise before I update the FW to hopefully resolve the USB issue.

Thanks for any help or suggestions!


r/DMR 16d ago

Which Talkgroups are on which repeaters

6 Upvotes

I have a Anytone 878 ii in the mail. It'll be my first DMR radio so I'm a complete noob. In the meantime, I thought I'd make a head start on making my codeplug.

In my area are repeaters - GB7KY and GB7XG. My understanding is I'll be limited to which talkgroups are set up on each timeslot on each repeater although I cant find any info on which talkgroups I can used on these repeaters.

Have I got this all wrong?

Thanks in advance

GM8CZU


r/DMR 18d ago

Nx1300

2 Upvotes

Who here has messed around with these kenwood radios? I know that with the nx5300, you can buy a “key” and add DMR to an NXDN radio. Does anyone know if you can do that with with the 1300? Also, if you add it, can you use both nxdn and DMR, or is it chose you flavor and stick with it?

My kenwood dealer is currently under medical leave, so I can’t just ask him.

Thanks for any help!


r/DMR 20d ago

Duplex conversation simultaneously beetwen sereval people

0 Upvotes

Hi,

I'm looking for a way/technical solution to enable several people to talk and listen to each other at the same time, as an intercom system would do.

In my various searches, I've come across Hytera, which seems to offer this in DMR tierII, but I can't see how to implement it, what equipment package I might need.

In short, how do you do it?


r/DMR 22d ago

Help With Code Plug

1 Upvotes

I have a CP from a user to give me a starting point. I added a channel and when I go to that channel on the RT3S it also shows a talk group.

I didn't assign a TG and don't know how this happened. Looking at the channel info there is no area for TG....where is this being assigned?

Thanks


r/DMR 22d ago

Reach hotspot from repeater?

9 Upvotes

I’m still trying understand how dmr works. If I am in range of a local dmr repeater, can I talk to a friend cross country who is using a hotspot? do I need a hotspot to talk directly with them?


r/DMR 25d ago

Help identifying pi hotspot

Post image
5 Upvotes

I was watching a video on using opengd77 with this hotspot with a display that showed station info of contact. Anyone know where I can get one like this?


r/DMR 27d ago

TYT MD-750 problem

1 Upvotes

Hello, I have a pair of MD750 radios by TYT and haven't used them in a long time, today I went to reprogram them and when I read the radio it asks for a password. I forgot what the password is that I used and tried everything from all zeroes to 0-9 and everything else. No luck. I was told if I just update the firmware it will wipe the password but I've been searching online all day and I can't find the damn firmware for the MD750.

Does anyone know where I can find it or have a copy of it that you can email to me?

Thanks.


r/DMR 28d ago

TYT MD-UV390Plus drivers for Windows 11

1 Upvotes

Have TYT MD-UV390Plus and trying to program for first time.

Have software & running Windows 11 on Parallel on a MacBook Pro with M1Pro chip.

Radio shows up in device manager but drivers require updating.

Downloaded suggested drivers Zip file from buytwowayradios.com but it won’t install.

Anyone have same /similar problem?
Suggestions? Solutions?


r/DMR 28d ago

Meu indicativo não aparece para que eu estou falando. Para mim aparece normal mas para quem está ouvindo não aparece, segue minha tela e de quem eu estava falando no aplicativo droidstar no celular

Thumbnail
gallery
0 Upvotes

r/DMR 29d ago

Want a DMR radio. Is there any benefit of a Anytone AT-D878UVII Plus over a Anytone AT-D168UV or Radioddity GD-168?

9 Upvotes

r/DMR Nov 25 '24

Looking to create a local hotspot for DMR and DSTAR

2 Upvotes

How do I go about doing this? I've got a small data center (4 rack cabinets, 1 telco rack) and plenty of power to setup a small spoke. I'm a noob when it comes to this stuff as my last involvement with hamster radio was about 11 years ago.