This is a “9’ stormwater drainage tunnel by others” from a 1966 print in my state.

I have searched extensively and there is no mention of this tunnel anywhere else online, and I have not seen one example where we have ever created a deainage tunnel without any support, like concrete.

The print I looked at includes the drainage system construction that they used this tunnel for, I know it can be used as one, but was it created as one?

The tunnel continues on past their construction, and I have been gaslit by my whole town acting like im reaching. But I see no examples of an stormwater drainage runnel anything like this, only ancient ones

What is your method for assuming or calculating catchment area of a stormwater point (for ex, a sedimentation unit)? when you have no idea about stormwater network, infrastructure.

All - the old GI worksheets (2015) had a row on the applicable practices that allowed you to route untreated WQv from one practice to another within the spreadsheet. The 2024 GI worksheets do not have this row anymore, but the manual does allow for volume reduction practices to be used in series. Does anyone know how to model this using the GI worksheets? Or is the solution to simply do and show the routing calcs in the SWPPP by hand.

I am doing an assignment on floodplain analysis for a property in US. I am not from US though. I found in the property drawing 03 flood levels. Existing, Basic flood level and proposed.

Whats the difference between the three. Furthermore, i did flood analysis on 100yr for the river and it comes as, say, 1000ft annld in property dwg this 1000ft is mentioned as existing flood plain elevation. So in this context plz explain the three.

Is it a good idea to get this plat 419? Pond access road is part of my site. Any issues?

I help head a county wide coalition of small phase 2 MS4s.

The state has not audited them and hasn't really fined them for blatant non-compliance either (one had to pay a small fine this year for not turning in their annual report THREE years ago)

How do I get them to care about complying when they just see it as the state's job they're passing off?

I'm having a hard time getting some one them to even do the bare minimum of completing the templates I send them for things like street sweeping plans or who has been trained on what.

The threat of fines and audits means nothing to them. Reduced flooding was brought up once and had their attention at a meeting but they still didn't hand in what I needed in the weeks and months afterwards.

What can I say to convince them to care enough to even do the bare minimum?

Hey everyone,

I work in the stormwater compliance field, and I’m trying to build a list of must-attend conferences for next year. I’ve been to StormCon before and found it valuable, but I’d love to get some new recommendations from others in the industry.

If you’ve attended any conferences that focus on stormwater management, environmental compliance, or related topics, I’d appreciate hearing your thoughts! Specifically, I’m looking for events that offer

Anyone knows how to do MUSIC Modelling? Are there any tutorials for using the MUSIC software from scratch? Tutorials on YouTube ain't newbie friendly.

Under normal conditions, the water level in the storm drain is always above the top of the 30" pipe in our stormwater drain, referred to as the normal pool water elevation, which is 7 feet. The 30" pipes flow water to a series of interconnected lagoon / pond at the same elevation, and then to surrounding wetlands.

What I cannot grasp is the how when it rains (a lot), the water flows into the drain, then into the lagoon, but the inlet in the lagoon is below the water level? What physics are involved to push that water down the pipes to the lagoon?

For those that have their CESCL certifications, what was your training and testing like? From what I can tell it’s 16 hours of online training followed by a test. A coworker and I both need to complete this in the next couple months so we were planning to do it simultaneously. Can we pause the training at any time? Or does it need to be completed in two 8-hour sessions? Does the training cover everything that’s included in the test? There’s a $500 fee to take the training and test so I want to make sure we’re prepared and there aren’t any surprises. Anything that you can add is appreciated.

I’m very interested in reading up on the topics covered in the CPSWQ. I’m coming from a different background (chemical oceanography and watershed science). Can anyone recommend a resource for me? Should I just go ahead and buy the CPSWQ study manual, or is there some seminal book on the subject? I’m doing some recon to see how interested I really am before considering a career change, so don’t need to take any exams yet. Thanks.

I need to estimate annual loads of a particular pollutant. I have the annual hydrograph and event mean concentrations (EMCs) for three storms during the wet season. How do I extrapolate the EMCs to other storms where I do not have pollutant data?

I'm reaching out to the community for some advice and support. I'm currently working as a stormwater technician for a municipal separate storm sewer system (MS4), and I'm the only person in my department. It's a unique challenge, and I'm trying to make the most out of my role, but it can be overwhelming managing everything on my own.

If you have any tips, best practices, or resources that could help me in this position, I'd greatly appreciate it. Here are a few specific areas where l'm looking for guidance:

1. Prioritizing Tasks: With so many responsibilities - from inspections and maintenance to compliance and public outreach - how do you prioritize tasks effectively when you're flying solo?

2. Time Management: Any strategies for managing time and staying organized would be really helpful. What tools or systems do you use to keep track of tasks and deadlines?

3. Community Engagement: I'm also responsible for engaging with the community. What are some effective ways to educate and involve residents in stormwater management when you have limited time and resources?

I’m eager to learn from your experiences and insights. Any advice or recommendations would be greatly appreciated!

Thank you in advance for your help.

it’s been two days since the 15 inches of rain stopped and our storm drains are near full level and water is not moving. In dry conditions, these drains are empty several feet deep.

is it normal for water to still be this high is a street storm drain, after 2 days of no rain, despite getting 15 inches?

Hey all I just started a job as a stormwater technician. I will be handling the illicit discharge detection program. I want to use the flowchart method (test ammonia, potassoum, flouride, and sirfactants) to test any discharge samples. I am having a hard time finding an easy way to test for surfactants. I got a probe from Hach but the test involves using benzene which is quite hazardous. I would like to find another method if possible.

edited for spelling

I live in a small town in upstate New York. For background, we moved into this house in November 2023. We had relatively no water problems other than some spongey grass in a low area of our front yard. If you look at the picture you can see that there is a culvert sticking out of the hill, that was just put in by the town yesterday while I was at work (with zero notice). Apparently, after speaking with the towns highway department, it has been plugged for 20 years and the town board wanted them to uncover it because houses further down the road were experiencing water issues. Allegedly back when this culvert was functioning (before it was plugged and covered for 20 years) there was a ditch running through our property to a creek behind the house. This may have worked then but now since time has passed this ditch is not graded properly and will not get water to the creek. Furthermore we got our first rain, and all of the water is pooling up right at the bottom of the hill where our grass was already spongey, along with that all the litter from the side of the road (wrappers, cigarettes, etc.) are also in my front yard. What can I do about this, I am a new homeowner and would appreciate some help.

Hey all,

Started learning on the job recently, and I have a question about BMP deficiencies being replaced/repaired/corrected within 72 hours of identification. I noticed that in other instances, the CGP was explicit about business days (i.e. 48 hours = 2 business days for visual inspections of discharge), but not so much for the corrections. Is it 72 hours from identification or 3 business days from identification? Appreciate if anyone can clear this up for me. Apologies if this is the wrong forum for this type of question; please point me in the right direction if it is. Thank you!

Carollo Engineers is an internationally recognized environmental engineering firm that specializes in the planning, design, and construction of all things water. We are seeking a Stormwater Client Lead/Senior Project Manager to support our vision of becoming the best water consulting firm.

For more information and to apply:

Stormwater Lead, FL: https://myjob.io/WbNNwVa

Stormwater Lead, TX: https://myjob.io/eGRPrR8

https://www.reddit.com/r/oddlysatisfying/comments/1dxpuds/unclogging_the_neighbourhood/?utm_source=share&utm_medium=mweb3x&utm_name=mweb3xcss&utm_term=1&utm_content=share_button

The title doesn't do my question justice. I'm planning a small, new townhouse development (two small buildings of 7 units each) and will end up with about 1/2 an acre of impervious area when it's all said and done. I've been speaking with an engineer about the project and I am trying to avoid an "over the top" stormwater drainage system. Ideally, I'd like to not have 350 ft of RCP, a full retention pond, etc. The cost of the project will go nuts with all of that.

Given the impervious area will be about half an acre, can I just run/slope the stormwater to a bioretention area and call it a day? Or perhaps just add one catch basin and run it to the bioretention pond, eliminating the need to connect to the city stormwater system 300+ feet away?